-
‘Slash’ mark steel hand stamp
- £8.75
- A 'slash' stamp for marking periodic inspection and test dates onto steel and aluminium cylinders. Hardened and tempered to precise limits, nickel plated for rust protection for maximum safety in use and long productive life.
- Add to basket
-
Composite Digital Calipers
- £13.15
- A composite digital caliper, for taking measurements inside and outside of objects. SR44/LR44 coin cell battery included.
- Add to basket
-
Pit probe and needle attachments
- £73.50
- This Pit Probe is made from Stainless Steel and comes with three attachments for holding the needle. There is a 90º, 45º and a straight attachment. The needles (not supplied) are held in place by a small Alan key lug, Alan key (not supplied). It is used for measuring the depth of corrosion indents found on the internal surface of…
- Add to basket
-
U-Type Slotted Screwdriver 150mm
- £11.80
- This screwdriver is perfect for removing the retainer nut of the cylinder valve cap. It has a 150 mm long shaft has a head width of 8 mm. Good handle grip and magnetic head.
- Add to basket
-
Inspection Mirror
- £9.45
- This high-quality inspection-mirror is 20 mm in diameter and of an ideal size to fit into a cylinder neck. Perfect for inspecting the internal condition around the cylinder shoulder.
- Add to basket
-
U-Type Slotted Screwdriver 200mm
- £14.15
- This screwdriver is perfect for removing the retainer nut of the cylinder valve cap. It has a 200 mm long shaft has a head width of 10 mm. Good handle grip and magnetic head
- Add to basket
-
Cylinder Bench Clamp
- £247.00
- This specially designed bench clamp is a converted 'Bessey' clamp that bolts to the work bench. It can take all sizes of cylinder from 3 litre to 18 litre. It has a ratchet locking system that firmly holds the cylinder in place. Release is achieved by pressing the black release lever under the handle. These clamps are 'made-to-order' and take…
- Add to basket
-
G5/8″ Extractor Bar
- £78.75
- A professionally machined mild steel tool that can be used for extracting the cylinder valve. The bar can be inserted into the valve G5/8" outlet and used as a lever to loosen the valve. If the lever is not long enough a hollow extension bar can be fitted over the solid bar to gain more leverage. A product information sheet…
- Add to basket
-
G5/8″ Extractor Plug
- £74.00
- This professionally machined tool fits into the 5/8" DIN outlet of a standard cylinder valve. A product information sheet is provided with this item.
- Add to basket
