Medium Size products like extractor bar
-
Pit probe and needle attachments
- £70.00
- This Pit Probe is made from Stainless Steel and comes with three attachments for holding the needle. There is a 90º, 45º and a straight attachment. The needles (not supplied) are held in place by a small Alan key lug, Alan key (not supplied). It is used for measuring the depth of corrosion indents found on the internal surface of…
- Add to basket
-
Small Black-Light (UV) LED Droplight 300mm
- £95.20
- 300 mm Ultraviolet (Black) LED Droplight consisting of a 10 mm wide aluminium rod, 300 mm long, The kit comes with a 12 volt, 2 amp, 3-pin DC power supply and foam handle
- Add to basket
-
Black-Light (UV) LED Droplight 700mm
- £106.40
- This is the UV version of the White-light LED Droplight. The dimensions are the same as the white-light version. This is used when checking cylinders for traces of hydrocarbons as part of the oxygen cleaning process of a cylinder. The kit also comes with a 12 volt, 2 amp, 3-pin DC power supply, foam handle and switch.
- Add to basket
-
Small White-Light LED Droplight 300mm
- £78.40
- This is a smaller version of the White-light LED Droplight consisting of a 10 mm wide aluminium rod, 300 mm long, The kit comes with a 12 volt, 2 amp, 3-pin DC power supply and foam handle.
- Add to basket
-
White-Light LED Droplight 700mm
- £89.60
- Consisting of a 10 mm wide aluminium rod, 700 mm long, this droplight comes with an LED strip on both sides. This droplight provides excellent illumination for internal inspection of cylinders. The kit comes with a 12 volt, 2 amp, 3-pin DC power supply, switch and foam handle.
- Add to basket
-
G5/8″ Extractor Bar
- £70.00
- A professionally machined mild steel tool that can be used for extracting the cylinder valve. The bar can be inserted into the valve G5/8" outlet and used as a lever to loosen the valve. If the lever is not long enough a hollow extension bar can be fitted over the solid bar to gain more leverage.
- Add to basket
-
G5/8″ Extractor Plug
- £56.00
- This professionally machined tool fits into the 5/8" DIN outlet of a standard cylinder valve.
- Add to basket
